ESAB CUTMASTER 60i
INTRODUCTION Manual 0-5488
2-2
2.03 Receipt Of Equipment
When you receive the equipment, check it against the invoice to make sure it is complete and inspect the equipment
for possible damage due to shipping. If there is any damage, notify the carrier immediately to file a claim. Furnish
complete information concerning damage claims or shipping errors to the location in your area listed on the back
cover of this manual.
Include all equipment identification numbers as described above, along with a full description of the parts in error.
Art # A-13354
Included items:
• 60i Power Supply
• SL60QD™ Torch and Leads
• Work Lead with Work Clamp
• Spare Parts Kit ( 2 Electrodes, 2 Tips, 6 O-rings)
• Operating Manual
• Filter Wrench
Move the equipment to the installation site before un-boxing the unit. Use care to avoid damaging the equipment when
opening the box.
To Next Page
Loading...
