ESAB CUTMASTER 60i - Power Supply Features

ESAB CUTMASTER 60i
Manual 0-5488 INTRODUCTION
2-5
Connect with a customer supplied grounding cable to the grounding screw near the top rear of the power supply
as required by applicable Local and National Codes or local authority having jurisdiction. Grounding screw is
identified with this symbol.
Customer Supplied Grounding
Art# A-13360
2.06 Power Supply Features
Handle and Leads Wrap
Torch Leads Receptacle
Control Panel
Work Lead Receptacle
Art # A-13258
Input Power Cord
Port for Optional Automation
Interface Cable
Gas Inlet Port
Filter Assembly
Input Power ON/OFF Switch
Art # A-13275