What to do if the FAULT light is ON on my ESAB EPP-362 Power Supply?
If the FAULT light is illuminated, inspect the CNC/Process Controller display screen for the specific error message originating from the power source.
Why POWER light doesn’t turn ON on my ESAB EPP-362?
If the POWER light, main contactor, and main fan do not activate, the issue might stem from blown fuses F1 or F2. Check these fuses.
How to troubleshoot a pump motor that doesn’t turn ON in my ESAB EPP-362 Power Supply?
If the pump motor fails to activate, the fuse (F3) might be defective, or there could be a faulty connection to the pump motor. Inspect both the fuse and the connection.
General| Brand | ESAB |
|---|---|
| Model | EPP-362 |
| Category | Power Supply |
| Language | English |
General safety precautions for installation and operation.
Covers fire, explosion, and electromagnetic field hazards and precautions.
Hazards from fumes/gases, and safety for cylinder handling.
Safety for maintenance, and meaning of safety symbols.
General overview, features, and specifications of the EPP-362.
Detailed technical specifications for different models.
Physical dimensions of the EPP-362 unit with a diagram.
General installation guidelines, unpacking, and placement.
Detailed procedure for connecting the primary input power.
Procedures for connecting coolant hoses and output cables.
Overview of CAN, J1 (RAS), and Analog interface connectors.
General operation, block diagram, and coolant flow.
Explains the display panel indicators and operating modes.
Details the power-up and plasma cutting start sequence.
General maintenance, cleaning, and component checks.
Explains flow sensors, level switches, and coolant filters.
Guide to diagnose issues using fault codes and symptoms.
List of error codes, descriptions, and explanations for troubleshooting.
Methods to isolate common problems like fan or torch issues.
Information on ordering genuine ESAB parts.
Contact details for customer service, technical support, and training.
To Next Page
