ESAB Fabricator ET 410iP User Manual

2  INTRODUCTION
0447 209 001
- 8 -
© ESAB AB 2022
2 INTRODUCTION
The Fabricator ET410iP is a welding power source intended for TIG welding and for welding with
covered electrodes (MMA).
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this manual.
2.1 Equipment
The power source is supplied with:
• 4.5m (14.8ft) mains cable with CEE plug
• Instruction manual
• Hose with quick connector

ESAB Fabricator ET 410iP Specifications

General

Brand	ESAB
Model	Fabricator ET 410iP
Category	Welding System
Language	English