ESAB WARRIOR EDGE 500 - Introduction; Equipment

2  INTRODUCTION
0463 772 001
- 9 -
© ESAB AB 2023
2 INTRODUCTION
The Warrior Edge 500 is integrated with a cooling unit and offers a complete multi-process package
supporting MIG/MAG, MMA, Live TIG and gouging. It is intended for use in combination with
RobustFeed Edge.
The power source is equipped with gateway to connect to the WeldCloud suite of applications,
including WeldCloud Productivity for production monitoring and WeldCloud Fleet for managing your
fleet of welding equipment.
For more information about the wire feed units, refer to the Instruction manual 0463 773 001.
For more information about WeldCloud, refer to the Quick start guide 0463 778 001.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this manual.
2.1 Equipment
The power source is supplied with:
• 5 m (16 ft) 95mm
2
return cable with earth clamp
• 5 m (16 ft) mains cable
• Instruction manual
• Quick start guide
• Safety instruction