Escene ES220 - Using Hold and Resume (Switch Calling Line); Transfer Calls; Using Mute; Do Not Disturb

2xx Series IP Phone
www.escene.cn/en/
Escene Communication
13
Using Hold and Resume (Switch Calling Line)
You can hold and resume calls.
If you want to... Then...
Put a call on hold Press HOLD button
Resume a call Press HOLD button
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
Transfer Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to... Then...
Talk to the transfer
recipient before
transferring a call
(consult transfer)
--1) Press TRANSFER button;
--2) Enter number;
--3) press “#”（default) ,
-or wait five seconds(default)then transfer the call
Using Mute
With Mute enabled, you can hear others speaking, but the others can't hear from you . You can use
mute in conjunction with the handset, speakerphone, or a headset。
If you want to... Then...
Toggle Mute on
Press Mute button, then the status light of mute is Red
Toggle Mute off Press Mute button, then the status light is off
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone（Can also be set to their voice mail or other extension numbers, etc.).
If you want to... Then...
Enable DND on a line --1) Press MENU or OK button > “Function setting” > “DND” >