Escene ES220 - Customizing Rings and Volume; WIFI Setting(Only WS220 N Has this Item)

2xx Series IP Phone
www.escene.cn/en/
Escene Communication
20
Customizing Rings and Volume
If you want to… Then…
Change the ring
tone
--1) Select “System setting” > “Phone setting” > “Ring type”;
--2) Press navigation to Select ring tone
Adjust the volume
level
--1) Select “System setting” > “Phone setting” > “Volume setting”
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
WIFI setting(only WS220N has this item)
Tips: The WIFI ip phone support 802.11b/g/n, not support 802.11a.
If you want to… This…
Set WIFI --1)Choose "Menu">"System settings">"advanced settings">"advanced
password (default is empty)"
--2) Press navigation to choose WIFI settings；
--3）Press "ok" button to change the it Enable or Disable
-Set WIFI IP: Default IP: make it default setting , Modify IP:
change it what you want. Mode: mode one: change the wifi IP
10.0.X.X/8 ;mode two : change the wifi IP 1.0.X.X/8 (it can prevent IP
conflict)
-Current site: the wifi which the phone use now and information
-WPA/WPA2: select the encryption mode(AES/TKIP)
-Site list: search site what you want to connect.