Escene ES270-C - Multi-lines to Answer the Call; Auto-Answer; Ending a Call; Using Hold and Recover (Switch Calling Line)

Escene Communication www.escene.cn/en/
and “Blacklist”,
- or press Navigation UP/DOWN button (in idle status) > select the desired contact.
--2) Then press button.
NOTE: You also can press the "DIR" to login this menu when in the idle.
3.5.6 Multi-lines to Answer the Call
Multi-lines to Answer the Call
--1) Another Line button is Red and flashing, Light strip is Red and flashing.
--2) Press the flashing Line button to answer (at this time, the original call will be hold.)
3.5.7 Auto-Answer
You can set the phone and let it auto-answer the coming call.
Auto-Answer the Coming Call
--1) Enable the Auto-Answer feature.
--2) Auto-Answer mode you can set in the MENU>Function Setting> Auto Answer >Device
⚫Speaker
⚫Handset
⚫Headset
When you use the Handset mode, at this time you need to hand up the handset and then it can work at this status.
--3) Filter Groups
Auto-answer the coming call in this special groups.
3.5.8 Ending a Call
To end a call, hang up. Here are some more details. NOTE: Press and hold the speaker key can change to Handset feature.
Hang up while using the Handset
--Return the handset to its cradle,
-or press End
Hang up while using the
Speakerphone
--Press Speaker button,
-or press Line button for the appropriate line,
-or press End
Hang up while using the Headset
--Press Handset button, （Do not keep the headset mode),
-or press End (keep the headset mode)
Hang up one call, but preserve
another call on the other line
--Press End,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that, you can switch
different calling line on our phone. Note: If the phone isn’t having the hold button, pls using the soft key.
If you want to...
Then...
Put a call on hold
--Press HOLD button,