Escene ES270-C - 6.3 Line Keys; Line Key Configuration; Function Keys Customization

Escene Communication www.escene.cn/en/
Echo Suppression Mode
Enable/Disable Echo Suppression Mode feature.
Side Tone
Enable/Disable Side Tone feature.
6.3 Line Keys
ITEMS
DESCRIBES
Line
The default values.
Speed Dial
You can use this key feature to speed up dialing the numbers often used or hard to remember.
Speed Dial Prefix
You can use this key feature to speed up dial a call with a specified prefix number.
DTMF
You can use this key feature to send the specification of arbitrary key sequences via DTMF.
BLF
You can use the BLF feature to monitor a specific user for status changes on the phone.
Paging
You can use multicast paging to quickly and easily forward time sensitive announcements out to
people within the multicast group.
Call Park
You can use call park feature to place a call on hold, and then retrieve the call from another phone in
the system (for example, a phone in another office or conference room).
Intercom
You can press the configured intercom key to automatically connect with a remote extension for
outgoing intercom calls, and the remote extension will automatically answer the incoming intercom
calls
BLA
This feature such as the BLF.
NOTE: ONLY WHEN YOU CHOOSE “SPEED DIAL”, THE RIGHT OF “NAME”,” NUMBER” WILL TAKE EFFECT.
6.4 Function Keys
Function Keys: If you do not like the default setting with the function keys feature. You can change to whatever you like.
NOTE: IF THE PHONE WITHOUT THE KEY, YOU CAN IGNORE IT.