Escene ES270-C - Transferring Calls; Using Mute; Do Not Disturb

Escene Communication www.escene.cn/en/
-or press soft key
Hold a line and switch to another
line
Press another Line button for the appropriate line
Resume a call on current line
--Press Line button,
Release a call on different line
Select the line want to release hold, press the line, so recovery;
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer recipient
before transferring a call
(consult transfer)
--1) Press TRANSFER button or press XFER.
--2) Enter number.
--3) press “#” （default),
-or press then transfer the call,
-or wait five seconds(default)then transfer the call
Transferred to idle lines or
other numbers without
talking to the transfer
recipient
(Blind transfer)
--1) Press TRANSFER button or XFER.
--2) Press ;
--3) Enter number.
--4) Press “#” （default)
-or press , then transfer the call.
-or wait five seconds(default)then transfer the call
Blind transfer to the
held line
--1) Press TRANSFER button or press XFER.
--2) Press the Line button of held line
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use mute in conjunction with the handset, speakerphone,
or a headset。
Toggle Mute on
Press C button, then the screen top and left will have a MUTE icon
Toggle Mute off
Press C button again, then the button lights off
3.5.12 Do Not Disturb
You can use the Do Not Disturb (DND) feature to block incoming calls on your phone with a busy tone（Can also be set to their voice mail or other
extension numbers, etc.).
Enable global DND
--1) Press DND.
--2) All enabled line on the phone would changes to status. and the icon is .
Enable DND on a single line
Press MENU button > “Function setting” > “DND” > (select line) “Enable”