Escene ES270-C - Phone Book Search; Features Not Set via Keypad; 4. WEB User Interface; Main Interface-Phone Status

Escene Communication www.escene.cn/en/
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search
--1）Press MENU button > “Function Setting”, you can select " Accurate Search "
--2) Then press Enable/Disable and Save.
--3) When you back to idle, you can use the digital keypad to search the contact.
T9 Search
--1) Press MENU button > “Function Setting”, you can select " T9 search"
--2) Then press Enable/Disable and Save.
--3) When you back to idle, you can use the digital keypad to search the contact.
NOTES: The Search Phone Book setting default is Accurate Search.
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:
1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user interface. To access the web user interface, you need to know
the IP address of your new phone. To obtain the IP address, press the C key on the phone. Enter the IP address (e.g. HTTP://192.168.0.10 or
192.168.0.10) in the address bar of web browser on your PC. The default username is root (case-sensitive) and the password is root (case-sensitive).
Main Interface-Phone Status
Here you can see as below information: System Run Time, Register Status, Network Status, System Information,