Escene ES270-C - 6.7 IP Strategy; IP Strategy Configuration

Escene Communication www.escene.cn/en/
ITEM
DECSRIPTION
Send Key
Select the default send key mode you want to use.
Dial Length
Enable this feature will limit the dial length. Default is 25.
No Dial Timeout
Setting the range with no dial timeout, default is 5.
Dial Rule
Select the Add Rule button to add dial rule, pls see as below detail.
ITEM
DECSRIPTION
ID
Dial Plan ID
IP
The IP of a phone which you want to call
Description
Description with this dial rule.
Port
Setting the Port with this dial rule, default is 5060.
Prefix
The number which you need to press if you want to call the phone
Called Insert Number
There have two option, Enable or Disable.
Position
Which position you want to insert the number
Number
Which number you want to insert
Called Delete Number
There have two option, Enable or Disable.
NOTES: If you want to know more detail about Dial Rule, pls find it in the official website to download the specific document.
HTTP://www.escene.cn/en.
6.7 IP Strategy
You can use IP Strategy feature to make a list which can be set to only allow the incoming call on the list.
e.g. As following picture, you can see it has 192.168.0.248 in the list. When you open this feature. It means you just allow come from this IP address
meeting