Escene ES282 - Making Calls to Contact; Multi-Lines to Answer the Call; Auto-Answer; Ending a Call

www.escene.cn/en/ Escene Communication
3.5.5 Making Calls to Contact
You can also dial a contact from the Personal Phone Book.
Placing Calls to
Contacts
1) Press MENU or OK button > Phone Book, you can select Personal
Phone Book, Enterprise Phone Book, LDAP and Black List,
- or press Navigation button (in Standby interface) > select the desired
contact.
2) Then press button.
NOTE: You also can press the DIR to login this menu when in the idle.
3.5.6 Multi-lines to Answer the Call
Multi-lines to Answer
the Call
1) Another Line button is Red and flashing, Light strip is Red and
flashing.
2) Press the flashing Line button to answer (at this time, the original
call will be hold.)
3.5.7 Auto-Answer
You can set the phone and let it auto-answer the coming call.
Auto-Answer the
Coming Call
1) Enable the Auto-Answer feature.
2) Auto-Answer mode you can set in the MENU>Function Setting> Auto
Answer >Device
⚫ Speaker
⚫ Handset
⚫ Headset
When you use the Handset mode, at this time you need to hand up the
handset and then it can work at this status.
3) Filter Groups
Auto-answer the coming call in this special groups.
3.5.8 Ending a Call
To end a call, hang up. Here are some more details.
Hang up while using the
Handset
Return the handset to its cradle,
-or press End
Hang up while using the
Speakerphone
Press Speaker button that is Red ,
-or press Line button for the appropriate line,
-or press End
Hang up while using the
Headset
Press Handset button, （Do not keep the headset mode),
-or press End (keep the headset mode)
Hang up one call, but
preserve another call on the
Press End,
-or refer to the above three methods