Escene ES282 - Using Hold and Recover (Switch Calling Line); Transferring Calls; Using Mute

www.escene.cn/en/ Escene Communication
other line
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result
of that, you can switch different calling line on our phone.
If you want to...
Then...
Put a call on hold
Press HOLD button,
-or press soft key
Hold a line and switch to
another line
Press another Line button for the appropriate line
Resume a call on current
line
Press Line button,
Release a call on different
line
Select the line want to release hold, press the line, so recovery;
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
1) Press TRANSFER button or press XFER.
2) Enter number.
3) press # （default),
-or press then transfer the call,
-or wait five seconds(default)then transfer the call
Transferred to idle lines
or other numbers
without talking to the
transfer recipient
(Blind transfer)
1) Press TRANSFER button or XFER.
2) Press ;
3) Enter number.
4) Press # （default)
-or press , then transfer the call.
-or wait five seconds(default)then transfer the call
Blind transfer to the
held line
1) Press TRANSFER button or press XFER.
2) Press the Line button of held line
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use mute in conjunction
with the handset, speakerphone, or a headset。
Toggle Mute on
Press C button, then the screen top and left will have a MUTE icon
Toggle Mute off
Press C button again, then the button lights off