Escene ES282 - Ring Tone and Volume Setting; Searching Phone Book; Cannot Set the Features with Keypad; WEB User Interface

www.escene.cn/en/ Escene Communication
and Date setting> Manual Setting
3）Manual Setting
- Manual Setting: Year\Month\Days\Hours\Minutes\Seconds
Time Display
Format
1）Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
Display Format
3）Time Mode: 24hour\12hour
Date mode:
DDMMWWW\MMDDWWW\WWWDDMMM\DDMMMYY\YYYYMMDD\DDMMYY
YY\MMDDYY\DDMMMYYYY\WWWDDMMM etc.
3.7.4 Ring Tone and Volume Setting
Ring Type
1）Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting>Ring Type
3）Select the ring type from 1 to 8 or custom ring, and then press Save to make it
work.
Volume Setting
1）Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting> Volume Setting
3）Volume Setting: Handset\Speaker\Headset\Ring volume
4) Press Enter to adjust the volume and press Save to make it work
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search
1）Press MENU or OK button > Function Setting, you can select Accurate
Search
2) Then press Enable/Disable and Save.
3) When you back to idle, you can use the digital keypad to search the
contact.
T9 Search
1) Press MENU or OK button > Function Setting, you can select T9 search
2) Then press Enable/Disable and Save.
3) When you back to idle, you can use the digital keypad to search the
contact.
NOTES: The Search Phone Book setting default is Accurate Search.
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:
1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user interface. To access the web
user interface, you need to know the IP address of your new phone. To obtain the IP address, press the C key on the