Escene ES282 - SIP Account Settings

www.escene.cn/en/ Escene Communication
⚫ Press Enter key
⚫ Set the IP\Mask\GW\DNS\web port\telnet port
⚫ Press Save key to make it work
⚫ Tips Network is changed, press OK reboot
PPPoE Setting
Feature
Operating Steps
PPPoE
Press OK or MENU> System Settings> Advanced Settings> Password (Default is
Empty)> Network> LAN Port
⚫ Press LAN Port to login into the menu
⚫ Select PPPoE mode
⚫ Press Enter key
⚫ Set the Username\Password\web port\telnet port
⚫ Press Save key to make it work
⚫ Tips Network is changed, press OK reboot
3.4 SIP Account Settings
ES282 IP phone makes calls based on sip accounts, it can support Single account or Multi-account, each account can be
configured to the different SIP server.
If you want to…
Then...
Create a SIP account
1) Select System setting > Advanced setting.
2) Enter the password required（The default is empty).
3) Select SIP > Account sip.
4) Select one of the accounts you want to set, you can configure the following parameters
-Enable account*: Select Enable
-Number of lines: Default is 2
-Description: description of this account
-Display Name: The name displayed on the screen
-Authentication user: The Authenticated users are matched with the SIP server. (The default with the same
account)
-Account*: the account matches with the SIP server. (extension number)
-User password*: the user password matches with the SIP server
-SIP Server*: The primary SIP server, all calls through this server
-Out Bound Server: The out bound SIP server
-STUN Type: Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note: When you finish the setting, you can press Save to make it work, and then you can see the status icon in the
LCD idle. The parameters with the * mark must be set.
Disable sip account
1) Select System setting > Advanced setting.
2) Enter the password required（The default is empty).
3) Select SIP > Account sip.