Escene ES282 - Keypad Setting; Language Setting; Message; Time & Date

www.escene.cn/en/ Escene Communication
3）Turn back the phone idle, you can call someone use IP address.
3.7 Keypad Setting
SayHi series IP Phone can through two ways configuration it, one is setting in MENU, another is setting in website. Here
just description in MENU.
NOTES: When you want to input the IP address like., it was replaced by the *.
3.7.1 Language Setting
ES282 IP Phone support Multi-Language setting, as below is an example.
Switch the Language
between Chinese and
English
1）Press OK or MENU button> System Setting> Phone Setting> Language
2）Here you can select
English\French\Italian\Polish\Protuguese\Runssian\Spanish\Turkish\
Chinese
3) After you finish select, press Save to make it work.
3.7.2 Message
ES282 have Message feature. It will display in the LCD when it has a New Message.
Create a Message
1）Press OK or MENU button.
2）Select Messaging
3）Voice Message: Setting the Voice Message code in here.
Text Message: Write down the Text Message in here.
4）Select Text Message> New Message.
5）Input the receiver and write down message body, and then press send to
finish.
Message Inbox
1）Select Message Inbox.
2）Select which one you want to check.
3）You can press Enter to read or press Del to delete.
3.7.3 Time & Date
SNTP
1）Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
and Date setting> SNTP
3）SNTP
-Time Zone：Setting the time zone
-NTP Server 1：NTP server address 1
-NTP Server 2：NTP server address 2
-DayLight：Enable/Disable Day Light
SIP Server
1）Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
and Date setting>SIP Server
3）Press Save to make it work
Manual Setting
Press OK or MENU button.
2）Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time