T-SM47j P49/54
T20-a
OPERATION TABLE
APPENDIX 1 - TORQUE CONVERSIONS
In the text of this document torque values are all detailed
in Nm. If the torque tools being used are imperial use the
chart below to convert the values to either ‘lb in’ or ‘lb ft’ as
required. Always ensure that the equipment in use is both
calibrated and that this calibration is valid (i.e. it has not
expired). For accuracy the following conversion factors can
be used:
1Nm = 8.85 lb in = 0.7375 lb ft
To Next Page
Loading...
