Esco Class II User Manual

10
2.6. Standby Mode (Half Speed)
In Standby Mode, the blower speed is greatly reduced resulting in less power consumption. This mode is
typically used during the night to maintain basic level of containment where the cabinet is not used by the
operator.
The mode can be accessed by pressing the FAN button when the cabinet is in operation. In half speed mode,
the airflow monitor is disabled and only the FAN button is operational, while other buttons are interlocked.

Esco Class II Specifications

General

Lighting	LED
UV Light	Optional
Certification	NSF/ANSI 49, EN 12469
Airflow Pattern	Laminar
Inflow Velocity	0.38 m/s ± 20%
Downflow Velocity	0.25 m/s ± 20%
HEPA Filter Efficiency	99.99% at 0.3 μm
Material	Stainless steel
Noise Level	< 65 dBA
Front Opening	200 mm (8")
Application	Microbiology, cell culture
Type	Biosafety Cabinet