30
Table 3-5. Descriptions for Outline of Setup Menu Item
First
Tier Menu
Second
Tier Menu
Factory
Setting
Selectable Parameters
Remote
(1)
RS-232 RS-232 or GPIB
Baud Rate 9600
9600, 4800, 2400,
1200,600, and 300
Parity None None, Odd or Even
Data Bit 8 7 or 8
Stop Bit 1 1 or 2
ECHO OFF ON or OFF
RS-232
Printer-Only OFF ON or OFF
Address 8 0 to 30
GPIB
(1)
Talk OFF ON or OFF
Ref Ω 600Ω
8000, 1200, 1000, 900,
800, 600, 500, 300, 250,
150, 135, 125, 124, 110,
93, 75, 50, 16, 8, 4, 2 Ω
Beep ON ON or OFF
Beeper
Frequency 4096Hz 4096, 2048, 1024, 8192Hz
State OFF ON or OFF
Refresh
Hold
Variation Count
(2)
300 100, 200, ……, 1000
(1)
These items will be appeared once GPIB interface is installed.
(2)
Variation count is used to recognize new value will be updated once the
variation of measuring value is exceeded the settling value.
To Next Page
Loading...