3
1-3 Options and Accessories
At the moment, one option is available for the meter, which option can be
installed at the factory and a field installable retrofit kit option is also
available:
IEEE-488 interface (Optional) provides full programmability. There are
two types of programming commands: IEEE 488.2 Common Commands
and Standard Commands for Programmable Instruments (SCPI). The
SCPI commands used in this device is conformance with the SCPI
Standard Version 1993.0.
Standard accessories come with the meter are:
Power cord
Protective holsters (Front and Rear)
Operation Manual
Test leads (Tip-type probe)
Available optional accessories are listed as below:
Test leads (Lantern-type probe)
Test leads (Tip-type probe)
Insulation piercing clip
RS-232 PC Link software and cable
IEEE-488 Interface
Rack-mount kit (used for single meter)
To Next Page
Loading...