Section 5. Calibrating the Meter
5-1 Introduction 47
5-2 Environment Condition 47
5-3 Warm up 47
5-4 Recommended Test Equipment 48
Section 6. RS-232 Remote Operation
6-1 Introduction 49
6-2 RS-232 Interface Overview 49
6-3 RS-232 Interface Parameter Set up 49
6-4 Using Commands 51
6-4-1 Types of Commands 51
6-4-2 Command Syntax 52
6-5 Instructions of Command Sets 53
6-5-1 Key Commands 53
6-5-2 Set Commands 54
6-5-3 Query Commands 59
6-6 Remote Program Examples Using RS-232 interface 65
Section 7. GPIB Remote Operation
7-1 Introduction 71
7-2 Description of the GPIB 71
7-3 GPIB Interface Parameters Setup 71
7-4 Commands Summary 72
7-4-1 Overview of Command Type and Formats 72
7-4-2 Response Message Data Types 73
7-4-3 Status Reporting 73
7-5 Instructions of Command Sets 77
7-5-1 IEEE 488.2 Common Commands 77
7-5-2 SCPI Commands 79
7-5-3 SCPI Commands Summary 87
7-6 Remote Program Examples Using GPIB interface 89
Appendices
A. Specifications 93
B. Maintenance 101
II
To Next Page
Loading...