ESI-50L Administrator’s Manual Function 2: CO lines
B.3
Function 16: System feature parameters
Function 162: Connect tone
This sets whether the system plays a system connect tone (two short beeps a user hears when a station answers).
Default: Enabled (the beep plays).
Function 163: Station feature set activation
Field 1: Group listen enable/disable
With this feature disabled: if a station user presses SPEAKER while on a call, the ESI phone immediately
turns off the handset and switches to hands-free mode.
If enabled, the group listen feature is available system-wide. If disabled, it is no longer available.
Default: Disabled.
Field 2: Privacy release enable/disable
With this feature enabled: if a station user presses a CO line key that is in use (lit red), the user will be
immediately conferenced with the call in progress on that line. With this feature disabled: pressing an in-use
CO line key has no effect.
Default: Disabled.
Warning: Adjusting this parameter while calls are in progress may result in temporary loss of audio.
Field 4: VIP text-messaging enable/disable
With this enabled, users of VIP Professional and VIP PC Attendant Console can use VIP to text-message.
Default: Enabled.
To Next Page
Loading...
