1.2
Status View
The status view is always visible when eSID is active and is intended to show information to the
driver that is always of interest, information that typically has a slow update rate.
• Outside Temperature (C/F °)
• Drive Time ( HH:MM )
• Actual Gear
(only Automatic Gearbox, when in Drive)
• Rain sensor active/inactive (RS)
• eSID Wiper function active (W)
• DPF Regeneration Active (R)
(only 1.9 diesel engines with DPF)
•
Active position in display structure
(P5 = Powertrain #5; F1 = Favorite #1 etc.)
Display Units
eSID supports three sets of display units (it is not possible to mix between them):
• Metric
o Torque (Nm)
o Distance (km)
o Temperature (Celsius)
o Fuel (Liter)
o Fuel Consumption (L/100km)
o Boost (bar/bar)
o Clock (24H)
• Imperial UK
o Torque (Lbft)
o Distance (miles)
o Temperature (Celsius)
o Fuel (Liter)
o Fuel Consumption (MPG UK)
o Boost (bar/InHg)
o Clock (12H)
• US
o Torque (Lbft)
o Distance (miles)
o Temperature (Fahrenheit)
o Fuel (US Gallon)
o Fuel Consumption (MPG US)
o Boost (psi/InHg)
o Clock (12H)
The display units are changed in the normal SID settings (“Customize” --> )
To Next Page
Loading...