eSID 03-06 - Clear DTC Function

www.esid.se
Page:
32 / 43
Na
me of document:
eSID 03-06 User Guide
V
ersion:
1.2
Clear DTC
Description
Clear DTC function is able to clear/erase all the fault codes in the entire vehicle.
This display function has the following states:
1. Disabled – When engine is running or when Ignition is not in RUN the function is disabled
2. Inactive – When engine is turned off and Ignition Key is in RUN position the functions is
Inactive and ready to be started
3. Running – eSID is erasing all the fault codes
4. Done – eSID has successfully erased all codes.
Units
• N/A
User Inputs
• CLEAR – Triggers a new code erase (If not Disabled)