1.2
Auto start
The normal SID display will always be active (eSID passive) when the key is inserted into the Ignition
Lock, this to ensure that all warning messages are taken care of before eSID is started.
If Auto start is enabled, eSID switches from passive to active state when vehicle speed goes above 20
km/h if:
• No active warning/icon on the SID
• Driver seatbelt attached
• Auto start has not enabled eSID this driving cycle (i.e. Auto start is only activated once per
driving cycle)
A new driving cycle starts if Ignition key is in OFF or if the driver door is opened while the vehicle
speed is zero.
Welcome Message
The welcome message consists of a 64x64 orange pixel icon and two rows of text. The text lines can
be adjusted in the settings menu and the icon can be changed using an external tool together with a
CAN-interface. This tool is not finalized when this user guide is written so keep track on the website
and the Facebook page for latest status.
The welcome message will be shown when the driver door is opened if any of the following
conditions has been fulfilled:
• eSID has been a sleep (car has been standing unlocked for a while)
• Driver door has been locked and unlocked.
To Next Page
Loading...