1. OPERATION PROCEDURE
The operation switches under the monitor correspond to the icons displayed on the bottom of the monitor.
For usual measurement, the operating switches correspond to the icons as shown below.
1. Clear switch
2. IOL switch
3. Measurement mode switch >
> >
4. Setup switch
1
5. Print switch
2
1
: Start method switching function: The start method (START items on the setup screen: Auto-
Quick/Auto/Manual) can be switched on the measurement screen by pressing and holding the setup
switch.
2
: Feed Function: It is switched to the feed function by pressing and holding the print switch and the
paper is fed.
Operation instructions of joystick
• When moving the joystick forward, the measurement unit
moves to the side of the examinee.
• When moving the joystick backward, the measurement unit
moves to the side of the examiner.
• When moving the joystick to the right or the left, the
measurement unit moves to the right or the left (respectively).
• When rotating the joystick to the right, the measurement unit
moves up and when rotating the joystick to the left, the
measurement unit moves down.
To Next Page
Loading...
Need help?
General
