1. GENERAL CAUTIONS
• It affects its measurement accuracy if fingerprints or dust etc. are on the optical parts, such as the
lens of the view window. Do not touch them with hands and avoid dust
• If fingerprints or dust are adhered on the optical parts, such as lens, wipe it gently with a soft cloth.
• Observe the following environmental conditions for use and storage.
Temperature Humidity Atmospheric pressure
Use
Storage /
Transportation /
• Avoid installation near TV or radio. The reception can be disturbed by electrical noise.
• If liquid is spilled on this device or a foreign substance is entered in it, unplug the power cord and
contact your local distributor.
Cut the power immediately and contact your local distributor if malfunction (noise, smoke etc.)
occurs. It can result in fire or injury if you keep using it.
• Do not attempt to disassemble it. It can result in malfunction or fire.
• If malfunction occurs, do not touch the inside of this device. Unplug the power cord and contact your
local distributor.
2. PRECAUTIONS REGARDING IT NETWORK
• This device can output the data to PC and so on through RS-232C interface.
• Connection of this device to an IT-network that includes other equipment could result in previously
unidentified risks to patients, operators or third parties.
• The responsible organization should identify, analyze, evaluate and control these risks.
• Subsequent changes to the IT-network could introduce new risks and require additional analysis.
• Changes to the IT-network include:
◦ Changes in the IT network configuration
◦ Connection of additional items to the IT-network
◦ Disconnecting items from the IT-network
◦ Update of equipment connected to the IT-network, and
◦ Upgrade of equipment connected to the IT-network
• Please contact your distributor about the detail of this device.
To Next Page
Loading...
Need help?
General
