In case of Auto Quick or Auto
It starts measurement automatically when it brings the subject eye into focus.
1. Look for the subject eye by operating the joystick.
The Kerato ring appears as bringing it into focus.
If the eyelid is over the Kerato ring, urge the examinee to open his/her eye wider.
2. The alignment mark (+) will appear as aligning the reticle mark with the center of the pupil of the subject
eye and bringing it into focus. Operate the joystick in such a way that the alignment mark (+) comes to the
center of the reticle.
1. Reticle mark
2. Alignment mark
To Next Page
Loading...
