Estun E200PS - Appendix C Parameter Description

E200PS Operation Manual
17
Appendix C Parameter Description
Parameter
Default
Range
Unit
Description
CONST
mm/inch
0
0~1
-

0: mm

1: inch
中文/English
0
0~1
-

0: 中文

1: English
Version
-
-
-
The current software version
number.
TchIn PARA
X-tea. in
10.00
0~9999.999
mm/inch
When the teaching of X-axis
is enabling, the operator
assigns to the X-axis of a
correct value, to represent
the gauge current position.
G-tea. in
1.00
0~9999.999
mm/inch
When the teaching of G-axis
is enabling, the operator
assigns to the G-axis of a
correct value, to represent
current size of the gap.
SINGLE
XP
0.00
-9999.999~999
9.999
mm/inch
Program position of X axle.
GP
0.00
0~99.99
mm/inch
Program position of G axle.
DX
0.00
0~9999.999
mm/inch
Retract distance of X axle.
CL
0
0~100
%
Actual time of the cut length
= Max time of the cut length
×CL
PP
0
0~9999
-
The number of processing
workpiece in this program.
CP
0
0~9999
-

PP=0: this value is the
current work piece.

PP>0: this value is the
remain work piece.
PROGRAM
ST
0
0~25
-
The total number of steps in
this program.
PP
0
0~99999
-
The number of processing
workpiece in this program.