2
1. EG - Declaration of conformity ............................... 3
2. WEEE-Declaration .................................................... 3
3. Important Notes – Please read first ........................ 3
3.1. Scope of delivery ........................................................... 3
4. Occupancy detection and its function.................... 4
4.1. Contact with the common conductor ...........................4
4.2. Current sensors (not with ECoSDetector Standard) .......4
4.3. RailCom® feedback (not with ECoSDetector Standard) .4
5. General properties ................................................... 5
5.1. Properties of the ECoSDetector Standard ......................5
5.2. Properties of the ECoSDetector .....................................5
6. Connecting it to the tracks ...................................... 6
6.1. Common contacts ........................................................6
6.1.1. Jumpers .....................................................................6
6.1.2. 3-rail track system (contact track section) ................... 6
6.1.3. Track switches ............................................................ 7
6.1.4. Reed contacts ............................................................7
6.1.5. Externally supplied switches .......................................7
6.2. Current sensor (not for ECoSDetector Standard) ...........8
6.2.1. Jumpers .....................................................................8
6.2.2. 2-rail track system ...................................................... 8
6.2.3. 3-rail track system ...................................................... 9
6.3. RailCom® feedback (no for ECoSDetector Standard) ....9
6.4. Two booster sectors on one ECoSDetector ..................10
7. Connecting to the command station.................... 10
8. Configuration on the command station .............. 11
8.1. Name and indenture number ......................................11
8.2. Feedback status ..........................................................12
Content
8.3. Finding an ECoSDetector ............................................12
8.4. Administration of several ECoSDetectors .....................12
9. Utilising feedback information ............................. 13
9.1. Setting routes .............................................................13
9.2. Track control diagram .................................................13
10. Technical data ....................................................... 14
10.1. Technical data ECoSDetector .....................................14
10.2. Technical data ECoSDetector Standard ......................14
11. Support and Assistance ....................................... 14
12. Warranty Certificate ............................................15
Copyright 1998 - 2012 by ESU electronic solutions ulm GmbH & Co KG. Mis-
takes, changes resulting in technical advancement, availability and all other rights
reserved. Electrical and mechanical characteristics, dimensions and sketches are
subject to change without prior notice. ESU may not be held responsible for any
damage or consequential loss or damage caused by inappropriate use of the pro-
duct, abnormal operating conditions, unauthorised modifications to the product,
etc. Not suitable for children under 14 years of age. Inappropriate use may result
in injury due to sharp points and edges.
Märklin® is a registered trademark of Gebr. Märklin® und Cie. GmbH, Göppin-
gen, Germany. RailCom® is a registered trademark of Lenz Elektronik GmbH,
Giessen. RailComPlus® is a registered trademark of Lenz Elektronik GmbH, Gies-
sen. All other trademarks are the property of their respective legal owners.
According to its policy ESU electronic solutions ulm GmbH & Co KG continues to
develop its products. Therefore ESU reserves the right to implement changes and
improvements to any of the products listed in the ESU documentation.
Duplication and preproduction of this documentation in any shape or form requi-
res prior written consent from ESU.
To Next Page
Loading...