eta plus ELC X Series - Page 76

6 Technical Data page 72
ELC X-Series-V1.5-06.18-GB subject to technical alterations
Lamp characteristics
Type
ELC X24-210
ELC X24F-210
ELC X24B-210
ELC X24i-210
Nominal lamp power
24 kW
Nominal lamp voltage
2100 V
Tolerance lamp voltage
nominal voltage ± 5 %
Threshold voltage of {lamp
voltage low} warning bit
1050 V
Ignition voltage / period
approx. 2500 V_rms / < 1 s, 5 trials
Lamp feeder cable: approved types and lengths
The use of cable types which have not been approved by the manufacturer
can lead to malfunction. The possibility of damage to the electronic ballast
cannot be excluded.
Typ
ELC X24-210
ELC X24F-210
ELC X24B-210
ELC X24i-210
Article no. 8067
U
0
/U = 2.3/4kV
2x2.5mm²
Ø 13.5 mm
2-40 m
Article no. 8045*
U
0
/U = 1.8/3kV
2x4mm²
Ø 16.9mm
GL-approved
on request
The data refers to the distance between ELC and lamp.
* This cable cannot be connected directly to the ELC due to the diameter.
Mechanical characteristics
Type
ELC X24-210
ELC X24F-210
ELC X24B-210
ELC X24i-210
Dimensions
(approx. H x W x D)
250 x 470 (±1mm) x 420 mm
Weight (approx.)
41 kg
42.2 kg
41 kg
Installation position
horizontal as described in 3.1
