Minimum clearances for maintenance for SH
The adjacent sketch shows the space requirements
and clearances for maintenance and installation of
the boiler.
Will an SH-P boiler be installed
for a TWIN burner?
If a TWIN auxiliary boiler for pellets might
be installed later, the additional space it
will need must be taken into account when
setting up the SH boiler.
Mirror image for TWIN to the left
The dimensions in parentheses apply for 40, 50
and 60 kW boilers.
On one side, left or right, the boiler needs 800 mm
of clearance for maintenance, so it can also be set
up in a mirror image of the sketch.
The sketch shows a boiler with right-hand
pellet burner; for a left-hand pellet burner
a mirror image applies.
To Next Page
Loading...
Need help?
General
