32E40-11
TV Overview
IR Receiver
2. INPUT - After connecting your DVD, cable box, etc. select the appropriate input source to view. Press the
SOURCE button to display the input options.Press the CH+ / CH- buttons to highlight the input source and
press the VOL+ button to select.
3. MENU - Press the MENU button to display. Press VOL+ to select from the 6 menu options available.
Press the CH+ / CH- buttons to select a feature from the selected menu then press the VOL+/VOL- buttons
to adjust the volume settings.
4. Channel (-CH+) - Press the CH- / CH+ buttons to select a channel in the TV mode.
5. Volume (-VOL+) - Press the VOL- / VOL+ buttons to adjust the volume up or down.
Front & Side Panel
A soft blue light illuminates when the
television power is on.
1. POWER - Press the POWER button to turn the TV ON/ OFF (standby). The screen image will ap-
pear within a few seconds, and the Blue LED will turn off.
Input Source
VGA
USB
HDMI1
HDMI2
HDMI3
To Next Page
Loading...
