EtherWAN EX1624W User Manual

24-Port Web-Smart Ethernet Switch
User’s Manual
1
FCC Statement
The FCC (Federal Communications Commission) restricts
the amount of radio frequency emission and radiation coming
from computer equipment.
The equipment introduced in this manual has been tested
and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user is required
to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the
manufacture would void the user’s authority to operate the
equipment.
Trademarks
Product names mentioned in this manual may be trademarks
or registered trademarks of those products.
All trademarks or brand names mentioned are properties of
their respective companies.

EtherWAN EX1624W Specifications

General

Layer	Layer 2
Weight	3.5Kg
Managed	Yes
MAC Address Table	8K
Jumbo Frame	9K Bytes
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Power Supply	100-240V AC, 50/60Hz
Dimensions	440 x 44 mm
Form Factor	Rack-mountable
Humidity	5%~95% (Non-condensing)
Ports	24 x 10/100TX + 2 x Gigabit Combo (RJ45/SFP)

Summary

FCC Statement

Trademarks

Preface

Product Overview

Front View

Shows the front panel of the Ethernet Switch with its ports and LEDs.

Package Contents

Lists the items included in the product package for the user.

Product Features

Front Panel Display

Power

Explains the function of the power LED indicator on the front panel.

Push Button

Describes the function of the push button for port selection or fiber module use.

IP RESET Push Button

Explains how to reset the switch's IP address using the dedicated button.

Port Status

Details the LEDs indicating the status of each port on the switch.

Installation

Selecting a Site for the Equipment

Provides requirements for choosing a suitable location for the switch, considering environment and ventilation.

Installation and Placement Instructions

Details procedures for mounting the switch in a rack or placing it on a flat surface.

Optional Fiber Module Installation

Connecting to Power

Connecting to Your Network

Cabling

Explains the process of connecting network cables to the switch and other devices.

Network Segmentation

Switch Configuration

Setting up Console Port Connection (Web-Based Browser Interface)

Guides users on connecting and accessing the switch's web interface via a browser.

Logging on to The Ethernet Switch

Details the process of logging into the switch, including default credentials.

Main Menu

System Change

Explains how to change system parameters like switch name and password via the web interface.

IP Configuration

Port

VLAN

Trunking

Save Configuration

Load Default

Technical Specifications

Physical Specifications

Connector Pinouts

Ordering Information