Generator G11 30
Generator G11 Operator’s Manual
ENSEAL Screens
Screen Description
Activating
(Note: Power is being activated�)
Cycle Complete
(Note: Cut is complete� Press ‘Settings’ for Settings Menu�)
Maintain Full Jaw Closure
Activation Cycle Timed Out: Reactivate
(Note: Cycle Complete was not reached� Reactivate to continue� Press ‘Settings’ for Settings
Menu�)
ENSEAL Settings:
Display Brightness
Hand/Foot Activation
Language
Extended Activation On/Off
System Information
System Information
Biomed Information
Hand Activation Off: Ready
(Note: Reactivate with footswitch, or adjust settings� Press ‘Settings’ for Settings Menu�)
To Next Page
Loading...
