EUCHNER MGB-L1-APA-AP4A1-S1-R-158117 - Main Differences between MGB-AP and MGB-AR

7
2119167-07-09/23 (translation of the original operating instructions)
Operating Instructions Safety Systems
MGB-L1…-AR.-… / MGB-L2…-AR.-… and MGB-L1…-AP.-… / MGB-L2…-AP.-…
EN
Important!
Ì Correct use requires observing the permissible operating parameters (see chapter 14. Technical
data on page 36).
Ì If a data sheet is included with the product, the information on the data sheet applies.
Table 1: Possible combinations for MGB components
Evaluation unit
Handle module
MGB-H-...
from V2.0.0
MGB…AR/AP
from V3.0.0
Key to symbols Combination possible
2.1. Main differences between MGB-AP and MGB-AR
System family Symbol Use
MGB-AP
AP
Optimized for operation in safe control systems.
If series connection is not necessary, the number of terminals required can be reduced using this system family.
MGB-AR
AR
Linking of several guards on one shutdown path. As a consequence, several safety doors can be very simply polled using one evalua-
tion unit or two control system inputs.