Euphonix System 5 - Automation Leds; Select;Punch Keys; Knob (Top) and Fader (Bottom) Automation and Control Features

System 5 Digital Audio Mixing System Operation Manual Dynamic Automation
175
14.2.1 Automation LEDs
Figure 14-2 shows the fader, switch, and knob automation interfaces. Each automated
parameter has two status LEDs:
• The red LED (right) indicates the parameter is in Write mode.
• The green LED (left) indicates the parameter is in Read mode.
Figure 14-2 Knob (top) and fader (bottom) automation and control features
14.2.2 Select/Punch Keys
Select/Punch keys perform two functions:
• Punch the control into and out of recording automation.
• Assign the selected automation mode to its corresponding parameter.
MSL
12
6
0
6
swap
Solo
on
C25
C1
All
knobs
Chan
Select
Fader Automation
Status LEDs
Fader Select/Punch key
Fader touch-
sensor LED
Touch-sensitive
fader
Auto-glide LED
Select/Punch key
Channel On
Channel On
A
utomation status LEDs
Strip Lock
LED
Wave
key
Channel Select
key
Swap channel
key
A
ll Funcs key
Channel On key
Solo
key
HiF
Select/Punch
for On/Off
switch
Knob Select/Punch
switch
Knob Automation
status LEDs
Switch Automation
status
LEDs
On/Off
switch
Knobset
Select/Punch switch
Top o f Strip