Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual CM403 Film/Post Module
224
15.7 Machine Control
Film environments often require both operators to share control over the machines. A
single TT007 can combine the machine control commands from two consoles.
Figure 15-12 Master and Slave Console Hookup
15.8 Track Arming
Starting in v2.5, System 5 supported track arming to allow the user to track arm up to
48 tracks of a single machine via MIDI or P2. The 48 mix busses are hard-mapped to
the 48 tracks. To support arming over multiple P2 machines (i.e., eight 6-track, six 8-track,
or two 24-track machines), a third-party device that distributes 48 tracks from one P2 port
to multiple P2 ports is required. Contact Euphonix customer support for more information.
15.9 Solo-In-Place
Whenever a channel is in solo, any sources currently assigned to the monitors are tempo-
rarily removed (i.e., externals and returns). The monitors automatically source the direct
outputs from the console busses. When the channel is no longer in solo, the monitors
revert to their setup prior to the solo.
TT007
MOTU
MOTU
Monitor Unit
I/F Pilot I/F Pilot
Slave
Console
Network
Master
Console
Network
MMC/MTC MMC/MTC

Euphonix System 5 Specifications

General

Brand	Euphonix
Model	System 5
Category	Music Mixer
Language	English