Euphonix System 5 - Device Inputs Normalled

System 5 Digital Audio Mixing System Operation Manual eMix Application
41
Normalled Connections
The inputs and outputs that require normalled connections should be designated in
PatchNet and saved to the Title Defaults.
In this example, the console group bus outputs 1–24 should be patched to both the R-1
and DAW inputs. Figure 4-7 shows the R-1 inputs patched from the Group Bus outputs.
If a Source is normalled to multiple destinations, <MULT> appears in the cell next to
the source.
Figure 4-7 Device Inputs normalled