9
Transport and storage
› Disconnect input power before removing
the wallbox for storage or relocation.
› Only transport and store the wallbox in its
original packaging.
› Store the wallbox in a dry environment in
the temperature range given in the techni-
cal specications (see page 11).
Caution
Putting ngers into or leaving other
objects inside the plug port could cause
injury or damage to the wallbox.
› Do not put your ngers or objects into
the plug port.
A front assembly with cracks in the glass
could cause the wallbox to become a
hazardous object, and could result in the
risk of injuries.
› If the glass of the front assembly breaks,
have the front assembly replaced imme-
diately by a certied electrician.
Charging the electric vehicle with the
charging cable not being completely
unwound may result in overheating of the
cable, which could damage the wallbox.
› Make sure to completely unwind the
charging cable and avoid overlapping
loops before charging the electric vehic-
le.
Notice
!
To Next Page
Loading...