EVBox Audi Wallbox - Install Wallbox

36
Install wallbox
English
Danger
Working on electric installations without
proper precautions will result in the risk
of electric shock, which will cause severe
injuries or death.
› Switch o input power before installing
the wallbox. Keep the power o until the
wallbox is fully installed with its front
cover installed and secure.
› Do not switch on the wallbox if the front
cover is not installed or not secure.
› Do not install a faulty wallbox or a wall-
box with a noticeable issue.
Installation or repairs by a non-certied
electrician will result in the risk of electric
shock, which will cause danger to the user,
severe injuries or death.
› The installation must only be performed
by certied electricians.
Warning
Installing the wallbox in direct exposure to
moisture and wet conditions (for exam-
ple rain or fog) could result in the risk of
electric shock and damage to the product,
which could cause severe injuries or death.
› Do not install the wallbox in direct expo-
sure to moisture and wet conditions (for
example rain or fog) and do not open the
wallbox in such conditions.
Not taking precautions against ESD
(Electrostatic discharge) could damage
electronic components in the wallbox.
› Take the necessary precautions against
ESD before touching electronic compo-
nents.
Using other materials than those specied
in this manual for installation, operation,
maintenance and/or service of the wallbox
could result in damage to the wallbox.
› Do not use other materials than specied
in chapter Prepare for installation,
especially materials containing silicone
or phosphorus, as they can damage the
wallbox.
Notice
!