41
b. Route the cables to their connection
terminals. Ensure that the bending
radius is within the limits for the cable
type.
c. Connect the wires according to the Audi
Wallbox model and the color coding
table below.
A. Audi Wallbox and Audi Wallbox plus
without kWh meter:
a. Connect L1 (and L2 and L3 - for 3-phase
version) wire(s) of the power supply
cable to L1, L2, L3 slots of the feed-
through terminals.
b. Connect Neutral (N) wire of the power
supply cable to the N feed-through
terminal.
c. Connect PE wire of the power supply
cable to the rst available slot of the PE
feed-through terminal.
To Next Page
Loading...