10. APPENDIX 5:
COMMISSIONING VALIDATION REPORT
Casing in good condition, no damage. General
condition and cleanliness of the structure is acceptable.
Validation that the charger is level and flat to the
ground as defined in the installation procedure.
Validate that the different charging connectors: Type 2,
CCS, CHADEMO and E/F plug are in good condition.
Confirm no evidence of condensation on the display
screen.
Validate that the three door locks are correctly closed to
guarantee sealing against water ingress
Confirm no evidence of humidity or water ingress inside
the charger.
Confirm the door hinges are correctly adjusted.
Verify visually the cables and cabling inside the charging
unit are acceptable. No bare or loose wires evident.
Confirm the presence of and tightness of the GPU fixing
screws and the correct fixing / tightening of the
CIRCUIT BREAKERS.
To Next Page
Loading...
