EasyManuals Logo

Evco EVJ 800 series User Manual

Evco EVJ 800 series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
EVCO S.p.A. EVJ800 | Installer manual ver. 1.0 | Code 144J800E104
page 4 of 48
1 INTRODUCTION
1.1 Product description
Controllers in the EVJ 800 range are capable of performing blast chilling and blast freezing cycles in an intuitive way,
both temperature and time controlled, with hard/soft function.
This versatile product provides users with a range of special cycles such as pre-cooling, fish sanitation and ice cream
hardening. The outputs are highly configurable thus making it possible to manage the loads needed to run thawing
cycles, needle probe heating and cabinet sterilisation.
The Bluetooth BLE connectivity (either built-in or with an EVlink external module) enables access from an Android
smartphone with the EVconnect app, making possible configuration, download and exchange of HACCP data and
parameter maps.
The user interface has a 2.8 inch colour graphic display, capacitive keys and an IP65 front with a continuous surface. It
has been designed for rapid front installation on a plastic or metal panel. For panels in glass or methacrylate, the
controller can be installed from behind and all the keys personalised on the panel surface.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Evco EVJ 800 series and is the answer not in the manual?

Evco EVJ 800 series Specifications

General IconGeneral
BrandEvco
ModelEVJ 800 series
CategoryController
LanguageEnglish

Related product manuals