28 29
buckle
storage
buckle
storage
1. Loosen harness
straps.
Actuate the harness
release lever on the front
of the seat while pulling
the harness strap outward
behind the fastened
chest clip.
1. Loosen adjuster.
The Tether Strap that comes with your child restraint
will be one of the two types below (A or B).
2.
Disconnect chest clip.
Push the release button
and pull the chest clip
apart.
2.
Remove Tether Hook from Anchor.
3.
Unbuckle harness.
Press the red button on
the buckle and release
both buckle tongues.
You may now remove
the child.
3.
Attach Tether Hook to storage clip.
Removing the Child
With 5-Point Harness
Removing the Tether Strap
Press the tab
C
and
twist, then remove
the hook from the
anchor
D
.
C
D
A
B
Press the adjuster release
button
B
to loosen.
Tilt the adjuster
A
and slide
the strap to loosen.
• To avoid a strangulation hazard, you MUST tightly roll or
fold excess Tether Strap and secure with the strap/rubber
band.
• Attach the Tether Hook
E
to the storage clip when
not in use. This will keep an unused Tether from hitting
someone during a crash.
WARNING
E
To Next Page
Loading...
