EasyManua.ls Logo

Evenflo Evolve - Installing the Accessories; Care and Cleaning

Evenflo Evolve
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54 55
DO NOT lubricate or immerse in water the LATCH
connectors, the buckle, or any other part of this child
restraint, unless rinsing is permitted, as stated on the back
of the buckle for your restraint.
Plastic and metal parts may be wiped clean with mild
soap and water and dried with a soft cloth.
Do not use abrasive cleaners or solvents.
Take care not to damage any labels.
The harness can be wiped clean with mild soap and
water. Allow harness to air dry.
Machine wash the seat pad separately in cold water,
delicate cycle. Tumble dry 10 to 15 minutes on low
heat.
NEVER use child restraint without the seat pad.
• To protect the child restraint from damage caused by
weather, rodents, and other elements common to
garages, the outdoors, and other storage locations,
remove the seat pad and thoroughly clean the
restraint and pad prior to storage. Take care to clean
in the areas where crumbs and other debris tend to
accumulate.
Care and Cleaning
To help protect the
vehicle upholstery, place a
towel beneath and behind
the child restraint.
TIP!
TIP!
Proper Disposal of This Child Restraint
At the end of this child restraint’s useful life, Evenflo
encourages you to dispose of it properly. Most of the
components in this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all plastic/foam parts and discard the rest.
If your local recycling center won’t accept the padding,
you may dispose of it in the landfill.
Note: Evenflo uses recycled materials in the
manufacturing process whenever possible but never
for components that are critical for safety.
General
Installing the Accessories
The optional Body Pillow
A
,
when placed in the restraint,
as shown, helps support
your child.
Install Harness Covers
B
above Chest Clip
C
for
added comfort. Wrap
Harness Covers around
harness straps and attach
Velcro strips as shown.
A
WARNING
WARNING
DO NOT use the
optional Body Pillow with children
weighing more than 18 kg (40 lbs).
Harness Covers MUST be installed when using the
5-point harness for children weighing 18 kg (40 lbs)
or less.
Not available on all models. Styles may vary.
Velcro
®
B
C
Autogoods “130”
130.com.ua

Related product manuals