35
1.
Remove one SureLatch
connector from the
rear-facing belt path.
2. Place the connector
in the forward-
facing belt path.
Pull the harness strap out
of the way and insert the
connector, behind the
straps, into the forward-
facing belt path opening,
as shown.
Repeat on the other side.
3. Make sure the
SureLatch assembly
does not interfere
with the internal
harness straps.
Note: Don’t forget to install the seat pad before installing
the child restraint in your vehicle.
Moving SureLatch to the Forward-facing
Belt Path
Forward-facing
To Next Page
Loading...
