Evenflo Symphony 65 - Forward-Facing Installation with Quick Connectors

IMPORTANT:
•Ifyouareusingthevehicleseatbelttosecurethechild
restraint, DO NOT use the Quick Connectors.
•Installthischildrestraintwiththevehicleseatbelt
(NOT LATCH connectors) if the child weighs more than
21.7 kg (48 lbs).
•Somevehiclemanufacturershavelowermaximum
weight ratings for LATCH anchors. Consult your vehicle
owner’s manual, or call the vehicle manufacturer, to
confirm the limits on your vehicle’s LATCH anchors.
1. Disconnect tether
hook from the back
of the child restraint.
2. Place the child
restraint in position.
Make sure child restraint
is in Recline Position #2
or #3 (p. 62).
Set child restraint on
te vehicle seat in for-
ward-facing position,
as shown. Lay the tether
strap over the back of
the vehicle seat.
Tether
Strap
IMPORTANT: NEVER use Recline Position #1 for forward-
facing, AND NEVER use Recline Position #2 with children
who weigh more than 18 kg (40 lbs).
Forward-facing Installation with Quick
Connnectors
42