39
5.
Connect and tighten
tether strap.
Connect the tether hook
to the anchor behind the
vehicle seat, as shown.
Pull the strap and tighten
the tether securely.
IMPORTANT: If your tether strap is too short to reach
from your child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink.
Forward-facing Installation with
SureLatch Connectors
Forward-facing
Notice
Your child restraint is equipped with one of two types of
tether adjusters: standard (shown above) or the TruTether™
(shown below). If your child restraint is equipped with the
TruTether adjuster, refer to page 63 for information about
proper tightening.
TruTether Adjuster
Tightness Indicator
Display